 |
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
TeckRouter router cutter Teckwin, MGE iCUT Vision software
Teckwin is now making a flatbed router, to compete with Gerber, Mimaki, etc. I will need to have an opportunity to test it before we issue comparative comments on pros and cons.
 |
TeckRouter router cutter Teckwin at DRUPA 2008. |
 |
TeckRouter router cutter showing some samples at SGIA 2008. |
 |
This photo was taken at SGIA 2008, TeckRouter router cutter. |
 |
| Teckwin cutter showed at SGIA 2007. |
Other XY flatbed cutters
Gerber M Series cutters, M-3000, M-1200 Kongsberg XE-10, Kongsberg XL Mimaki CF2, CF3 Zund cutters (many models) |
|
Most recently updated June 3, 2008.
First posted October 8, 2007.
 |
 |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
 |
 |
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
| |
 |
|
 |
|
 |
| |
 |
| |
 |
| |
 |
|
 |
|
 |
|
 |
|
 |
| |
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
|
Most of our updates for 2008-2010 onward are in FLAAR Reports in Adobe Acrobat PDF format. It is more efficient for us to make new information available in PDF format. So if the web page itself is not updated, check out www.wide-format-printers.NET to see if the printer, RIP, or other subject is covered in an update in a PDF download. And if you prefer to speak with Nicholas Hellmuth in person, you can bring him to your company anywhere in the world as a consultant.
|