 |
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
Dilli Neo Jupiter now available directly from Dilli (since DRUPA 2008)
Because the Dilli Neo Plus and Dilli Neo Venus are increasingly popular via the Agfa versions, Dilli itself is no longer exhibiting them independently. In past years Dilli had the same printers in their booth as Agfa had in their booth a few meters away (each with different names).
But Dilli makes a diverse range of UV printers, and two models are not rebranded by Agfa: the Dilli Neo Jupiter and the Dilli Neo.
 |
The Dilli Neo Jupiter flatbed printer shown at DRUPA 2008. |
 |
Saati briefly used the Dilli Jupiter flatbed printer to resurrect the Aellora SureFire TKMP1000 and its hybrid UV ink
The Dilli Jupiter small-format flatbed printer was first shown, if I remember correctly, at SGIA 2006, or perhaps at ISA 2006. It was shown with little fanfare, and then was not shown again (that I noticed) until it reappeared as the Saati Jupiter, a replacement for the discontinued Markem Aellora SureFire TKMP1000.
The rise and fall of the Aellora hybrid UV ink chemistry is an interesting chapter in the history of inkjet printing. This was a hybrid ink, not a hybrid printer chassis (the Aellora SureFire TKMP1000 printer was a dedicated flatbed).
Saati hired at least one of the former Aellora people for their rejuvenation of the Aellora SureFire TKMP1000 and hybrid UV ink concept. Saati used a Dilli Jupiter dedicated flatbed printer to create a semblance of resurrection of the Aellora SureFire TKMP1000 with the hybrid UV ink concept.
But after being displayed at SGIA '07, Saati cancelled their flatbed UV printer project and the staff went their separate ways. At DRUPA 2008 (May 2008), Dilli reintroduced the Jupiter on its own (not as an OEM to someone else).
 |
Samples by the Dilli Neo Jupiter flatbed UV-cured inkjet printer. |
 |
| Dilli Neo Jupiter flatbed UV-cured inkjet printer at SGIA 2006. |
 |
| The Dilli Neo Jupiter flatbed UV-cured inkjet printing some samples at SGIA 2008. |
Updated June 2008 after DRUPA 2008.
 |
 |
 |
|
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
|
Most of our updates for 2008-2009 onward are in FLAAR Reports in Adobe Acrobat PDF format. It is more efficient for us to make new information available in PDF format. So if the web page itself is not updated, check out www.wide-format-printers.NET to see if the printer, RIP, or other subject is covered in an update in a PDF download. And if you prefer to speak with Nicholas Hellmuth in person, you can bring him to your company anywhere in the world as a consultant.
|